Our tent pegs are made from flat steel pressed into a shallow “V” shape
Tent pegs are used to help maintain the tent’s shape, and to hold the tent in place against wind.
Our pegs are 23cm long, they rely on the broadness of the section to not turn under tension, they are suitable for soft soils (snow), sandy soils (sand, by the lakeshore), meadows, lawns, in short, all typical ground where people on holiday camp!
Weatherproof – with a thin layer of zinc to protect them
The bottom end is cone-shaped, so our tent pegs can be easily pushed into the ground by hand (hard ground will require a tent peg mallet to drive them into the ground).
The top end is equipped with a hook – in order to prevent the rope to slip off the spike.
The hole in the upper end will help you to pull the peg out of the ground once the camp is over.
Delivery: 10 tent pegs
– Material: galvanized steel (zinc plated)
– V-shaped with a conical bottom end
– Hook to prevent the rope to slip off
– Hole (approx. 6.5 mm): to easily take the peg out from the ground
– Dimensions per piece: approx. 230x20x1mm
– Weight per piece: approx. 47g
– Weight of the set (10 pieces): approx. 470g
Our tent stakes hold your tent firmly in place
Lightweight (but sturdier than aluminum) – they are perfect to be carried in your backpack when you go on an excursion / trekking.
Indispensable to put up a basic ridge tent, dome tent, tunnel tent, large family tent, quick-pitch tent for 2 people or for the whole family, to camp on the beach, by the lake, but also to anchor tarpaulins and shading nets in the garden, etc.
AMANKA camping equipment – multi-purpose
LIGHTWEIGHT – almost as much as aluminum, but definitely sturdier, durable and weatherproof. Each peg (approx. 230x20x1mm) weighs only 47 grams, is made of solid metal covered with zinc. Delivery includes 10 pegs
SUITABLE FOR SOFT GROUND AND MEADOW – our tent stakes are 23cm long, perfect to be driven or pushed into sand on the beach / lakeside, snow, lawns, in short, all typical ground where people on holiday camp!
SOLID ANCHOR – our tent pegs are made from flat steel pressed into a shallow “V” shape, they rely on the broadness of the section to not turn under tension. The bottom end is cone-shaped, so our tent pegs can be easily pushed into the ground by hand
THEY HOLD YOUR TENT FIRMLY IN PLACE – the top end of each peg is equipped with a hook (it prevents the rope to slip off the spike) and a hole (so you can easily pull the peg out of the ground once the camp is over)
MULTI-PURPOSE – indispensable to put up a basic ridge tent, dome tent, tunnel tent, large family tent, quick-pitch tent for 2 people or for the whole family, to camp by the lake, but also to anchor tarpaulins and shading nets in the garden, etc.
Furniture
Lighting & Heating